V-Belt, Poly V-Belt, Banded V-Belt, Variable Speed V-Belt products
FullSail is professional of V-Belt, Poly V-Belt, Banded V-Belt, Variable Speed V-Belt, Transmission Belt, Rubber Belt, Car Belt, Timing Belt.

  v-beltpoly v-beltbranded v-belt
variable speed v-belttiming belt
 
CLASSICAL V-BELT WRAPPED TYPE
  Banded V-Belt

Characteristics:
* Wrapped construction.
* Concave sidewalls straighten out to the exact shape of the groove, ensuring uniform contact (see picture below)
* Arched top prevents ''dishing'' and distortion of the tensile section, thus uniformly distributes the load on the cords.
* Rounded bottom corners relieve internal stress and offer high resistance to corner wear.
* Static conductive.
* Nonflammable.

The classical section V-belt performs better than any other classical belt on heavy-duty industrial drives.

* Premium performance at standard prices.
* Reliability and efficiency.
* Long belt life.
* Match system, except for Z-section which is almost exclusively used as single belt.



    
  CLASSICAL V-BELT RAW EDGE COGGED TYPE
  Bandless, Moulded Notch, Conventional Cross Section V-Belt

Characteristics:
* Raw edge construction.
* Tough tensile members give superior resistance to fatigue and shock loads.
* Edges are precisely cut to exact dimensions providing even wedging action.
* Moulded notches reduce bending stress, especially on drives with smaller diameter pulleys.
* Polychloroprene compound.
* Static conductive.
* Nonflammable.

Provides superior performance on heavy-duty industrial drives. lt carries a higher kilowatt rating than banded conventional cross section belts.
Especially suited for small dlameter drives.



   
  WEDGE V-BELT WRAPPED TYPE
  Narrow Section Banded V-Belt

Characteristics:
* Wrapped construction.
* Concave sidewalls straighten out to the exact shape of the groove, ensuring uniform contact (see picture below)
* Arched top prevents ''dishing'' and distortion of the tensile section, thus uniformly distributes the load on the cords.
* Rounded bottom corners relieve internal stress and offer high resistance to corner wear.
* Static conductive.
* Nonflammable.

Power RE-X Narrow V-Belts offers the firmness and strength of a belt of wrapped construction, but also the efficiency of a narrow section V-belt. lt allows more compact drive design than a belt of conventional cross section and transmits more horsepower in a given space.Super HC also manages those speed ranges that a classical V-belt cannot handle, lt is recommended on all industrial uses.

   
  WEDGE V-BELT RAW EDGE COGGED TYPE
  POWER-X NARROW V-BELT

 Characteristics:  
* Raw edge construction with narrow cross-section.
* Moulded notches reduce thermal and bending stresses.
* Straight sidewalls ensure uniform wedging action.
* Tough tensile members resist fatigue and shock loads.
* Fabric layers above and below the cord improve stability.
* Polychloroprene compound, static conductive (ISO 1813) and non self-igniting.

This high capacity belt transmits more power and handles higher speed ratios with smaller pulleys than any other conventional V-belt. Quad-Power saves energy, extends belt life and eliminates space and weight problems. Particularly suited for high rpm motors with very small diameter pulleys. Available in XPZ/3VX, XPA and XPB/5VX sections and in ISO datum lengths.



    
  CLASSICAL DOUBLE V-BELT
  HC Narror Banded V-Belt Characteristics:  
Double V-belts combine temperature and oil resistance with antistatic features.
The cord is placed at the centre of the belt cross. section, making the belt flexible in both directions.
Double V-belts are able to transmit approx.50% of the power ratingsspecified for the classical V-belt with the same top width.Asregards to section 25x22, the power rating is approx. 65% of that of a C sections.

The double V-profile of the belt makes it suitable for drives with an s-bend and in which both sides of the belt have to be used for trans.mitting power. This type of drive is especiallyused in agricultural machinery.
The belt is also used for special industrial drives.

   
  VARIABLE SPEED V-BELT
    
  Variable Speed V-Belt Characteristics:
* Engineered notch contour increases flexibility and assures maximum heat dispersion while considerably decreasing running temperatures.
* Strong transverse rigidity resists belt distortion in the pulley.
* Uniform undercord thickness ensures smooth running.

Variable Speed V-Belts provides top performance on variable speed drives. The belt adjusts itself automatically to the pulley groove providing a wide range of speeds and speed ratios. This long-lasting belt ensures smooth running and a high load carrying capacity. Available in ISO profiles.